HP StorageWorks Secure Path V3.0C for Linux and Linux Workgroup Edition Installation and Reference Guide (AA-RU7VD-TE, February 2004)

Installing Secure Path Software
54 Secure Path v3.0C for Linux and Linux Workgroup Edition Installation and Reference Guide
Configuration files added by Secure Path
Table 4 lists the files added as part of the Secure Path v3.0C installation.
Table 4: Configuration files
File name Description
hsx.conf Used by spagent to make preferred path settings persistence across
reboots. Whenever you modify the preferred path setting, spagent
modifies hsx.conf. After rebooting, spagent reads the file and sends an
appropriate IOCTL call to mark the path to Preferred.
swsp.conf Used by spagent to make various settings persistence across reboots.
It stores global as well as per storage system Path Verification, Load
Balance and Auto-Restore settings.
notify.ini Contains the e-mail address of the user and the level of notification.
The spmgr utility and spagent agent sends the event notification to the
user based upon the entry in this file.
spmgr_alias Contains the alias name used for various Secure Path entities. The
spagent daemon uses this file to decode the alias name into the
original name of the entity.
spmgr_stop_list Contains a list of reserved key word. The spmgr utility uses this file to
restrict the use of reserved key words as an alias.
sppf ASCII data for Secure Path persistence. This file contains LUN IDs,
device special files, and symbolic link information.
clients Stores spmgr password information.