HP StorageWorks Secure Path V3.0C for Linux and Linux Workgroup Edition Installation and Reference Guide (AA-RU7VD-TE, February 2004)

Installing Secure Path Software
46 Secure Path v3.0C for Linux and Linux Workgroup Edition Installation and Reference Guide
3. Choose one of the following installations based on your operating system
parameters:
— To install Linux v3.0C or Linux v3.0C Workgroup Edition on 32-bit Red
Hat operating systems, enter a command similar to the following:
# rpm -ivh Secure-Path-3.0C< Full or wkgrp >-
< rev #> .noarch.rpm
For example:
# rpm -ivh Secure-Path-3.0CFull-4.0.noarch.rpm
— To install the Linux v3.0C or Linux v3.0C Workgroup Edition on 64-bit
Red Hat operating systems, enter a command similar to the following:
# rpm -ivh Secure-Path-3.0C <Full or wkgrp >64-
<rev #> .noarch.rpm
For example:
# rpm -ivh Secure-Path-3.0Cwkgrp64-3.0.noarch.rpm
— To install the Linux v3.0C or Linux v3.0C Workgroup Edition on a 64-bit
SUSE/UnitedLinux installation, enter a command similar to the
following:
# rpm -ivh Secure-Path-3.0C <Full or wkgrp >UL64-
<rev #> .noarch.rpm
For example:
# rpm -ivh Secure-Path-3.0CFullUL64-3.0.noarch.rpm