HP StorageWorks Secure Path V3.0C for Linux and Linux Workgroup Edition Installation and Reference Guide (AA-RU7VD-TE, February 2004)

Hardware Setup

40 Secure Path v3.0C for Linux and Linux Workgroup Edition Installation and Reference Guide

Figure 3: Cabling two RAID controllers and two SAN switches

3. If you do not have a supported version of the StorageWorks Solution

Software you will need to install it now. Refer to the HP StorageWorks

Secure Path v3.0C for Linux and Linux Workgroup Edition Release Notes for

supported hardware and software. Also see the instructions provided in the

Solutions Software kit.

1 Top Controller 6 Bottom Controller, port 2 (to host

via top switch)

2 Bottom Controller 7 FC cable to host bus adapter A

3 Top Controller, port 1 (to host via top

switch)

8 FC cable to host bus adapter B

4 Bottom Controller, port 1 (to host via

bottom switch)

9 SAN Switch (top)

5 Top Controller, port 2 (to host via

bottom switch)

10 SAN Switch (bottom)

SHR-2462A