HP StorageWorks Secure Path V3.0C for Linux and Linux Workgroup Edition Installation and Reference Guide (AA-RU7VD-TE, February 2004)

Hardware Setup
34 Secure Path v3.0C for Linux and Linux Workgroup Edition Installation and Reference Guide
4. Verify the configuration of the RAID system by entering either of the following
commands:
CLI > show this_controller
CLI> show other_controller
An example of the controller output (with reference line numbers appended) follows:
Controller: 1.
HSG80 ZG90305234 Software V86F-4, Hardware E08 2.
NODE_ID = 5000-1FE1-0000- 8920 3.
ALLOCATION_CLASS = 0 4.
SCSI_VERSION = SCSI-3 5.
Configured for MULTIBUS_FAILOVER with ZG90811309 6.
In dual-redundant configuration 7.
Device Port SCSI address 6 8.
Time: 01-AUG-2000 09:39:19 9.
Command Console LUN is 0 10.
Host PORT_1: 11.
Reported PORT_ID = 5000-1FE1-0000-8923 12.
PORT_1_TOPOLOGY = FABRIC (fabric up) 13.
Address = 021000 14.
Host PORT_2: 15.
Reported PORT_ID = 5000-1FE1-0000-8924 16.
PORT_2_TOPOLOGY = FABRIC (connection down) 17.
NOREMOTE_COPY 18.
Cache: 19.
128 megabyte write cache, version 0012 20.
Cache is GOOD 21.
No unflushed data in cache 22.
CACHE_FLUSH_TIMER = DEFAULT (10 seconds) 23.