HP StorageWorks Secure Path V3.0C for Linux and Linux Workgroup Edition Installation and Reference Guide (AA-RU7VD-TE, February 2004)

Secure Path Technology
27Secure Path v3.0C for Linux and Linux Workgroup Edition Installation and Reference Guide
Table 3 shows the default values with which Secure Path is enabled.
Use the spmgr utility to customize your configuration. Refer to “Managing
Secure Path” on page 57 for more information on spmgr customization.
Table 3: Secure Path installation default values
Parameter Default value
Autorestore off
Load Balancing (HSG80, EVA5000,
EVA3000 only)
off
Path Verification on
Verification period 30 seconds
Preferred paths None
Console event log messages Critical
Syslog event log messages Critical, Warning
Mail event log messages Logging is disabled(0)
Critical, Warning, and Informational
(3)
Mail event log e-mail Enabled to send to the root account