HP StorageWorks Secure Path V3.0C for Linux and Linux Workgroup Edition Installation and Reference Guide (AA-RU7VD-TE, February 2004)

HSG80 Controller Failover Transitions
112 Secure Path v3.0C for Linux and Linux Workgroup Edition Installation and Reference Guide
10. Restore the UNIT to the storageset mapping that was recorded earlier by
entering the following command:
CLI> add unit dn storage_set_name
Caution: Do not initialize the storagesets. This action will destroy data on the
storagesets.
11. Restart both controllers by entering the following commands:
CLI> restart other_controller
CLI> restart this_controller
Note: Restarting both controllers allows connections to be reacquired. You can also
accomplish this by rebooting the servers.