HP StorageWorks Secure Path V3.0C for Linux and Linux Workgroup Edition Installation and Reference Guide (AA-RU7VD-TE, February 2004)

HSG80 Controller Failover Transitions
109Secure Path v3.0C for Linux and Linux Workgroup Edition Installation and Reference Guide
After both controllers have restarted, the controller pair will be bound in
Multiple-bus Failover mode with consistent views of all the RAID array
information.
5. Verify that the controllers are now in Multiple-bus Failover:
CLI> show this_controller
6. If the RAID array had connections prior to making this transition, examine the
connections by entering the following command:
CLI> show connections
7. Inspect the last column, offset value, by entering the following
command.
CLI> set connection connection_name unit_offset=0
Note: In Transparent Failover mode, the controller, by default, assigns an offset value
of 0 to the left-hand port and an offset value of 100 to the right-hand port. In
Multiple-bus Failover mode, the controller assigns an offset value of 0 to all ports,
unless existing connections have nonzero offset values.
Controller:
HSG80 ZG83502145 Software V85F-0, Hardware E03
NODE_ID = 5000-1FE1-0000-3350
ALLOCATION_CLASS = 0
SCSI_VERSION = SCSI-3
-> Configured for MULTIBUS_FAILOVER with ZG80200290
-> In dual-redundant configuration