HP StorageWorks Secure Path V3.0C for Linux and Linux Workgroup Edition Installation and Reference Guide (AA-RU7VD-TE, February 2004)

Removing/Upgrading Secure Path
103Secure Path v3.0C for Linux and Linux Workgroup Edition Installation and Reference Guide
32-bit Example:
************************************************************
INVALID RPM:
You must have a valid Secure-Path-3.0BFull-5.0.noarch.rpm in
the /tmp/securepathRPM directory, to validate the update!!!
Update failed.
Exiting...
************************************************************
64-bit Example:
************************************************************
INVALID RPM:
You must have a valid Secure-Path-3.0BFull64-4.0.noarch.rpm
in the /tmp/securepathRPM directory, to validate the
update!!!
Update failed.
Exiting...
************************************************************
— If the rpm finishes successfully and there was a previous installation of
Secure Path, the following message displays:
Copying saved configuration files to /etc/CPQswsp/…
— If the rpm does not finish successfully and there was a previous
installation of Secure Path, the following message displays:
/etc/CPQswsp directory not found, configuration files will
not be copied. Installation did not finish successfully
Configuration files are saved in /tmp/spholddir.