HP StorageWorks Secure Path V3.0C for Linux and Linux Workgroup Edition Installation and Reference Guide (AA-RU7VD-TE, February 2004)

Removing/Upgrading Secure Path
100 Secure Path v3.0C for Linux and Linux Workgroup Edition Installation and Reference Guide
— For 32- bit Red Hat 2.1 with a non-supported errata version, but with a
proper kernel version of 2.4.9-e.35smp, the following error message
displays:
************************************************************
The system is not running the errata kernel (2.4.9-e.35smp).
The system is not running a supported errata kernel.
Would you like to install anyway? [y/N]
************************************************************
— For 64-bit Red Hat 2.1 with a non-supported errata version, but with a
proper kernel version of 2.4.18-e.41-smp, the following error message
displays:
************************************************************
The system is not running errata kernel (2.4.18-e.41smp).
The system is not running a supported errata kernel.
Would you like to install anyway? [y/N]
************************************************************
If you choose N or n, the following message displays and the installation ends:
You have chosen not to continue. Exiting...
— The installation script checks for previous versions of Secure Path. If
there is no instance of a Secure Path v3.x installation, the following
message displays:
You do not currently have an installation of secure path.
If Secure Path is installed, a message similar to the following displays:
RPM: Secure-Path-3.0BFull-5.0 is installed.
OR:
RPM: Secure-Path-3.0Bc-5.0 is installed.
The installation script then checks in the /tmp/securepathRPM directory.
For example:
Secure-Path-3.0Bc-5.0.noarch.rpm
The following message displays:
Checking for rpm...
— If this installation script cannot find the rpm, an appropriate installation
type message displays, as shown in the following examples: