HP StorageWorks Secure Path V2.0D Service Pack 2 for IBM AIX Release Notes (T3034-98201, May 2004)

Secure Path operational features
9Secure Path v2.0D Service Pack 2 for IBM AIX Release Notes
For more information on HACMP and agent installation, refer to one of the
following references:
■ HP StorageWorks HSG80 ACS Solution Software Version 8.7 for IBM AIX
Installation and Configuration Guide
■ HP StorageWorks IBM AIX Kit V3.01 or V3.01 for Enterprise Virtual Array
Installation and Configuration Guides
Partitioned storagesets
Storage Units configured from partitioned storagesets must be identified and
defined as other units on the RAID storage system. It is required that all partitions
be assigned to the same HSGx0 controller.
Under Secure Path, if units created from partitions have a preferred path set to a
controller, then all such partitions must have the same preferred path. Failover and
failback events of a partitioned unit affect all partitions of the same storageset.
Connection offsets
If connection offsets are used with Secure Path, set the same offset value on both
connections to the AIX HBA pair. Refer to the HP StorageWorks HSG 80 ACS
Solution Software Version 8.7 for IBM AIX Installation and Configuration Guide.
The cbxfcar autorecovery daemon
The Secure Path autorecovery daemon (cbxfcar) is installed in conjunction
with the FC HBA driver. The autorecovery daemon (cbxfcar) starts when the
driver is installed and an entry is added to /etc/inittab to automatically
start the daemon on system boot.