HP StorageWorks Secure Path V2.0D Service Pack 2 for IBM AIX Release Notes (T3034-98201, May 2004)

Secure Path operational features
8 Secure Path v2.0D Service Pack 2 for IBM AIX Release Notes
Installation types
Installations of Secure Path v2.0D Service Pack 2 may be of two types:
■ A server that has never been configured with a RAID system. For this
installation, verify that the steps outlined in Chapter 3 of the HP
StorageWorks Secure Path v2.0D for IBM AIX Installation Guide have been
completed.
■ A server that already has a RAID system with a single path installation under
the IBM AIX Solution Kit. The steps to perform this installation are
documented in Chapter 4 of the HP StorageWorks Secure Path v2.0D for IBM
AIX Installation Guide.
Installation in the Enterprise Virtual Array environment
The Enterprise Virtual Array storage system requires unique fabric connections.
For detailed information, refer to the HP StorageWorks Secure Path v2.0D for
IBM AIX Installation Guide and the HP StorageWorks IBM AIX Kit for Enterprise
Virtual Array Installation and Configuration Guide for your EVA version.
Installations in the HACMP environment
■ Secure Path v2.0D Service Pack 2 FC HBA driver must be installed on all
nodes accessing the RAID system in the cluster.
■ Secure Path v2.0D Service Pack 2 for IBM AIX requires modification to the
ODM database to perform properly in the HACMP environment. The binary
file cluster.HSGXX.scsi.support.1.0.0.1 in the hacmp
directory must be installed if Secure Path is used in a HACMP environment.
■ SWCC Installation Considerations:
— The SWCC agent must be installed and configured on all systems in the
cluster. Verify that each server has the agent access device identified and
that the RAID systems are seen by each server.
— The SWCC agent may only be running on one server in the cluster.
— Install the SWCC Agent failover script on one and only one node of the
cluster.