Release Notes HP StorageWorks Secure Path 3.0F Service Pack 4 for HP-UX 11i v1.0 and 11i v2.0 (5697-8002, March 2009)

What's new with Secure Path 3.0F SP4 for Active-Passive disk arrays
There are no new features, fixes, and enhancements in Secure Path 3.0F SP4 for Active-Passive disk
arrays.
IMPORTANT:
If you have Active-Passive disk arrays (EVA3000 and EVA5000 with fw 3.x), you can choose to
continue using Secure Path 3.0F SP3.
Operating system support
Table 1 lists the system features and requirements for Secure Path 3.0F SP4 for Active-Passive disk
arrays. For additional support information, see the HP website:
http://www.hp.com/support
Table 1 Secure Path 3.0F SP4 for Active-Passive disk arrays system features and requirements
RequirementSystem feature
HP-UX 11i (v1.0, v2.0) 64-bit
HP-UX 11i (v1.0) 32-bit
HP-UX version
PA-RISC and Integrity serverHP-UX server system types
EVA3000 (HSV100)
EVA5000 (HSV110)
Supported storage arrays
HFS (UFS)
JFS (VxFS)
File systems
Dual HSV100 controllers running VCS 3.100 or later
Dual HSV110 controllers running VCS 3.100 or later
Dual HSVX700 controllers
Controllers
SCSI-2 with or without CCL
SCSI-3 with CCL
SCSI modes
HP Logical Volume Manager (LVM) or
Veritas Volume Manager (VxVM)
Volume managers
HP MC/ServiceGuard 11.15 or laterClustering
Switched fabricFibre Channel mode
NOTE:
For supported HBAs, drivers, and firmware versions, see the HP SPOCK website:
http://www.hp.com/storage/spock
HP StorageWorks Secure Path 3.0F Service Pack 4 for HP-UX 11i v1.0 and 11i v2.0 5