Release Notes HP StorageWorks Secure Path 3.0F Service Pack 4 for HP-UX 11i v1.0 and 11i v2.0 (5697-8002, March 2009)

RequirementSystem feature
HFS (UFS)
JFS (VxFS)
File systems
HP Logical Volume Manager (LVM) or
Veritas Volume Manager (VxVM)
Volume managers
HP MC/ServiceGuard A11.15 or laterClustering
Switched Fabric and Arbitrated LoopFibre Channel mode
NOTE:
For supported HBAs, drivers, and firmware versions, see the HP SPOCK website:
http://www.hp.com/storage/spock
Table 5 lists the patch revisions for this release and earlier releases of Secure Path 3.0F SP4 for
Active-Active disk arrays.
Table 5 Patch revisions for Secure Path 3.0F SP4 Active-Active disk arrays
Patch revisions (minimum)HP-UX version
Hardware Enablement Bundle June 2004
HWEnable11iB.11.11.0406.5 or later
ULM-SERVICE B.11.11.01 SCSI Upper Layer Module Service
PHKL_27321 Early KRS
PHKL_27096
PHKL_32670 1.0 SCSI Upper Layer Module Service Patch
PHKL_34161 1.0 F ibre Channel Mass Storage Patch
11i v1.0
Hardware Enablement Bundle May 2005
HWEnable11iB.11.23.0505 or later
DumpAASupport (to enable HA support for Active-Active disk array dump devices)
11i v2.0
Table 6 lists the configuration limits for Secure Path 3.0F SP4 Active-Active disk arrays.
Table 6 Configuration limits for Secure Path 3.0F SP4 Active-Active disk arrays
Maximum supportedMaximum qualifiedMinimumParameter
Platform limit41Adapter support
Platform limit41Storage arrays per host
Array limitArray limit1
LUNs per storage array
per host
N/A321Paths per LUNs
20