Release Notes HP StorageWorks Secure Path 3.0F Service Pack 4 for HP-UX 11i v1.0 and 11i v2.0 (5697-8002, March 2009)

= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =

0 c24t0d2 P5849D5AAPN00W td0 255/255/0/0.2 c4t0d3 WWPN: Unknown Path

State: Active [P]

1 c24t0d2 P5849D5AAPN00W td0 255/255/0/0.2 c10t0d3 WWPN: Unknown Path

State: Active

2 c24t0d2 P5849D5AAPU05E td0 255/255/0/0.2 c6t0d3 WWPN: Unknown Path

State: Standby

3 c24t0d2 P5849D5AAPU05E td0 255/255/0/0.2 c8t0d3 WWPN: Unknown Path

State: Standby

2. Note the port WWNs of the active controller using Command View EVA. For this controller

P5849D5AAPN00W, the port WWNs are 50001FE15002B36C and 50001FE15002B36D.

Enumerating all Fibre Channel devices

To enumerate all Fibre Channel devices, select EFI Shell [Built-in] from the EFI Boot Manager, as

described in step 2 of Problem with setboot command.

Shell> drivers

V VERSION E G G #D #C DRIVER NAME IMAGE NAME

== ======== = = = == == ===================================

14 00000010 B - - 8 17 PCI Bus Driver PciBus

25 00000110 B X X 1 6 HP Tachyon XL2 Fibre Channel Mass S PciRom

Seg=00000000

27 00000140 D X X 1 - HP 2 Gb Fibre Channel Driver PciRom

Seg=00000000

28 00000140 D X X 1 - HP 2 Gb Fibre Channel Driver PciRom

Seg=00000000

2B 00000110 B X X 1 6 HP Tachyon XL2 Fibre Channel Mass S PciRom

Seg=00000000

Choose the fibre channel drivers of the system

Shell> drvcfg 25

Configurable Components Drv[25] Ctrl[26] Lang[eng]

Shell> drvcfg –s 25 26

Current policy: Enumerate all Fibre Channel devices

Please select the desired enumeration policy:

0 : Enumerate all Fibre Channel boot devices in the boot option

list

1 : Enumerate all Fibre Channel devices

Q : exit with no change

Policy >

Choose 1.

Repeat the steps for the other driver instance too (in this example 2B)

Shell> reconnect –r

Shell> exit

Reconfiguring dump devices in the event of path failover

In the event of a path failover to a device configured as a system dump device, a reconfiguration

using an alternate active path to the device is attempted automatically.