Installation and Reference Guide HP StorageWorks Secure Path 3.0F Service Pack 4 for HP-UX 11i v1.0 and 11i v2.0 (5697-8001, March 2009)

autopath retrieve command
The autopath retrieve command restores the Secure Path load balancing policy, preferred path
settings, and deleted LUNs across Secure Path upgrades. Retrieval of settings may not be effective if
you have made SAN configuration changes for the host. Use the autopath retrieve command
for retrieving persistence data after upgrade.
Syntax:
autopath retrieve
Example:
# autopath retrieve
NOTE:
Starting with 3.0F SP2, the command 'autopath retrieve' is obsolete. The Kernel Registry Services(KRS)
feature of HP-UX 11i is used for the maintenance of persistent data.
autopath set_lbpolicy command
The autopath set_lbpolicy command sets the load balancing policy for the specified device
path.
Syntax:
autopath set_lbpolicy <{policy name} {path}>
description: sets load balancing policy
usage:
autopath set_lbpolicy <{policy name} {path}>
Policy name: The load balancing policy to set
Valid policies are
RR : Round Robin.
SST : Shortest Service Time.
SQL : Shortest Queue Length.
NLB/OFF : No load Balancing.
Path : Device Special File e.g./dev/dsk/c#t#d#
Example:
# autopath set_lbpolicy RR /dev/dsk/c0t0d0
autopath set_prefpath command
The autopath set_prefpath command sets the preferred device path to a Secure Path device.
When the path details are displayed with the autopath display command, the preferred path is
marked (pp).
Syntax:
autopath set_prefpath path
The parameter path specifies the physical device path.
Secure Path for Active-Active disk arrays98