Installation and Reference Guide HP StorageWorks Secure Path 3.0F Service Pack 4 for HP-UX 11i v1.0 and 11i v2.0 (5697-8001, March 2009)

usage:
autopath add {option} {device path | WWLUNID | Array Type}
option:
-l -- for entering the WWLUNID
-r -- for entering the Array Type
device path : -- device special file e.g./dev/dsk/c#t#d#
WWLUNID : -- World Wide Node Name of the LUN
Array Type : -- Array Type( XP/VA/EVA-AA)
Example:
# autopath help delete
description: delete LUNs from the SecurePath's active device list
usage:
autopath delete <device path | {option} {WWLUNID | Array Type}>
device path : -- device special file e.g./dev/dsk/c#t#d#
option:
-l -- for entering the WWLUNID
-r -- for entering the Array Type
WWLUNID : -- World Wide Node Name of the LUN
Array Type: -- Array Type( XP/VA/EVA-AA)
autopath discover command
The autopath discover command discovers any new devices or paths added, or any existing
devices or paths deleted, and updates the data to the list of Secure Path for Active-Active devices.
The virtual device special files gets created for all the discovered LUNs.
The autopath discover command allows you to set he value (ON or OFF) to enable the automatic
discovery of devices after reboot. The default value is set to OFF.
Syntax:
autopath discover [option]
Options:
ON : Enable the auto discover devices feature
OFF : Disable the auto discover devices feature
Example:
# autopath discover
Discovery of New Paths / LUNs will be effective only if ioscan
and insf -e are executed prior to autopath discover
autopath: Initiating Autopath Discover...
autopath: Discover in progress...
autopath: Discover successful.
# autopath discover ON
AUTOPATH : Auto discover settings updated
HP StorageWorks Secure Path 3.0F Service Pack 4 for HP-UX 11i v1.0 and 11i v2.0 97