Installation and Reference Guide HP StorageWorks Secure Path 3.0F Service Pack 4 for HP-UX 11i v1.0 and 11i v2.0 (5697-8001, March 2009)

# autopath monitor
description : starts the monitor deamon to control the fail-back and pro-active
path monitor features
NOTE:
For more information, see I/O load balancing .
autopath help command
The autopath help command lists all of the autopath commands. It also displays syntax of an
autopath command and its usage.
Syntax:
# autopath help [command]
Example:
# autopath help
usage: autopath <command>
command:
add : add a LUN/Array-Type to SecurePath's control. Addition
will happen only after execution of
'autopath discover' command
delete : delete LUN/Array-Type from the SecurePath's control
discover : discover the newly added device(s) and also recognize
the status of old device
display : display accessible storage information
set : set SecurePath configuration parameters
set_lbpolicy : set load balancing policy
set_prefpath : set preferred path
retrieve : retrieve the persistence setting
recover : start the recover deamon to recover the failed devices
help : display this help message
Example:
# autopath help discover
description: discover the newly added device and also recognize
the status of old device
usage:
autopath discover [option]
options:
ON : Enable the auto discover devices feature
OFF : Disable the auto discover devices feature
Example:
# autopath help add
description: enables addition of a LUN from unattached-list to
Secure Path's device list. LUN is brought under Secure Path's
control only after execution of the autopath discover command
Secure Path for Active-Active disk arrays96