Installation and Reference Guide HP StorageWorks Secure Path 3.0F Service Pack 4 for HP-UX 11i v1.0 and 11i v2.0 (5697-8001, March 2009)

==================================================================
HPswsp Version : A.3.0F.04F.00F
==================================================================
Array IDs
==================================================================
060B-0000-14E2-E050
060B-0000-1534-1C50
==================================================================
Details of all LUNs connected from an array
The autopath display -r <Array ID> command displays details of all LUNs connected from
an array.
Syntax:
autopath display -r <Array ID>
Example:
# autopath display -r 5000-1FE1-5002-3890
==================================================================
HPswsp Version : A.3.0F.04F.00F
==================================================================
Auto Discover : OFF
==================================================================
Array Type : EVA-AA
Array WWN : 5000-1FE1-5002-3890
Read Optimize : ON
Path Verification Period : 00:10
==================================================================
Lun WWN : 6005-08B4-0001-28B9-0001-9000-0007-0000
Virtual Device File : /hpap/dsk/hpap5
Load Balancing Policy : No Load Balancing
Lun Timeout : Infinite Retry (-1)
==================================================================
Device Path Status
==================================================================
/dev/dsk/c8t0d1 Active
/dev/dsk/c10t0d1 Active
/dev/dsk/c16t0d1 Active
/dev/dsk/c18t0d1 Active
Display autopath discover status
The autopath display command displays the status of the discover settings for the array.
Syntax:
phsdp3# autopath display |more
==================================================================
HPswsp Version : A.3.0F.04F.00F
==================================================================
Secure Path for Active-Active disk arrays90