Installation and Reference Guide HP StorageWorks Secure Path 3.0F Service Pack 4 for HP-UX 11i v1.0 and 11i v2.0 (5697-8001, March 2009)

About this guide

This guide describes HP StorageWorks Secure Path for Active-Passive disk arrays and Secure Path

for Active-Active disk arrays. It provides information to help you:

• Understand Secure Path technology

• Determine hardware and software prerequisites

• Install Secure Path software

• Manage Secure Path

NOTE:

The HSG family of arrays was last supported in Secure Path HP-UX 3.0F. Any references to support

these arrays applies to 3.0F and earlier releases of Secure Path.

Overview

This document describes the following:

• Chapter 1 addresses Secure Path 3.0F SP4 for Active-Passive disk arrays, which includes:

• HP StorageWorks disk array EVA3000 (HSV100)

• HP StorageWorks disk array EVA5000 (HSV110)

• Chapter 2 addresses Secure Path 3.0F SP4 for Active-Active disk arrays, which includes:

• HP StorageWorks disk array EVA4000/EVA6000/EVA4100/EVA6100 (HSV200)

• HP StorageWorks disk array EVA4400 (HSV300)

• HP StorageWorks disk array EVA8000/EVA8100 (HSV210)

• HP StorageWorks disk array EVA6400 (HSV400)

• HP StorageWorks disk array EVA8400 (HSV450)

• HP StorageWorks disk array XP10000/XP20000

• HP StorageWorks disk array XP12000/XP24000

Intended audience

This guide is intended for system administrators who are experienced with the following:

• Data processing and direct-access storage device subsystems and their basic functions.

• Operating systems, including commands and utilities

• Any of the storage system disk arrays described in Overview

HP StorageWorks Secure Path 3.0F Service Pack 4 for HP-UX 11i v1.0 and 11i v2.0 9