Installation and Reference Guide HP StorageWorks Secure Path 3.0F Service Pack 4 for HP-UX 11i v1.0 and 11i v2.0 (5697-8001, March 2009)

Syslog messagesUser notification messagesEvent description
CPQswsp: The unit 600508B400
01492000016000005B0000 is
not discovered and not asso-
ciated with any of the dis-
covered Arrays. So the per-
sistent data of this unit
will be deleted
Occurs usually when the unit
which was deleted in the previous
boot using the spmgr delete
command is not discovered dur-
ing boot scan of this session.
CPQswsp: Mapping error.
Cause: Error in reading the
persistent data in the pre-
vious boots. This will res-
ult in the change of c#t#d#
value of the LUN 600508B400
01492000016000005B0000
Occurs when there is an error in
reading the persistent data of the
LUN and which resulted in asso-
ciating this LUN's persistent data
with the wrong array.
CPQswsp: Mapping error.
Cause: Due to error in
reading the persistent data
in the previous boots, there
are duplicate entries for
the swsp h/w address 2. This
may result in the change of
c#t#d# values of the LUNs
configured for the above h/w
address on the Array
50001FE150003440
Occurs when there is an error
reading the persistent data of the
interface node of the array in the
previous boots and thus allowing
some other interface node to get
the same h/w address value. In
the subsequent boot, if the first
interface node's persistent data
is read properly, then there is
more than one interface node
having the same h/w address
value, which results in duplicate
entries.
CPQswsp: Mapping error.
Cause: Due to error in
reading the persistent data
in the previous boots, there
are duplicate entries for
the mapping data of hw_addr
2, target 1, lun 0. This may
result in the change of
c#t#d# value of the LUN
600508B400
01492000016000005B0000
Occurs when there is an error
reading the persistent data of the
LUN in the previous boots and
thus allowing some other LUN to
get the same c#t#d# value. In the
subsequent boot, if the first LUN's
persistent data is read properly,
then there is more than one LUN
having the same c#t#d# value,
which results in duplicate entries.
CPQswsp: spmgr delete Opera-
tion Error. Cause:
600508B40001492
000016000005B0000 not de-
leted, is a dump device
Occurs when the spmgr delete
command is executed on an EVA
LUN which is configured as the
system dump device (for HP-UX
11iV2.0 only).
Secure Path for Active-Passive disk arrays76