Installation and Reference Guide HP StorageWorks Secure Path 3.0F Service Pack 4 for HP-UX 11i v1.0 and 11i v2.0 (5697-8001, March 2009)

Syslog messagesUser notification messagesEvent description
WARNING: CPQswsp: All paths
for Target/LUN 0/2
(WWID=600508B400
01490C0001A00001E20000) on
Controller P4889B49IM failed
All paths for Target/LUN
0/2 (WWID=600508B4000
149200001600000C00000) on
Controller P4889B49IM
failed.
Occurs when all the paths to the
LUN have failed.
CPQswsp: Availability for
LUN 600508B40001490C0
001A00001E20000 changed to
Alive
Availability for LUN
600508B40001490C0001A00001E20000
changed to Alive.
Occurs when a new LUN is ad-
ded or a quiesced LUN is re-
stored to Secure Path.
CPQswsp: Path c42t0d2 Failed
(LUN 600508B40001490C0
001A00001E20000 Controller
P4889B49IM Array
50001FE100150AE0 HBA td3)
Path c42t0d2 Failed (LUN
600508B40001490C0001A00001E20000
Controller P4889B49IM Ar-
ray.
Occurs when the path to the end
LUN has failed.
WARNING: CPQswsp: Availabil-
ity for LUN
600508B40001490C0001A0000
1E20000 changed to Dead
Availability for LUN
600508B40001490C0001A00001E20000
changed to Dead.
Occurs when a path to the end
LUN has either quiesced the con-
troller or HBA connecting to that
LUN, or LUN has failed.
CPQswsp: Aborting scanning
of Secure Path devices due
to other outstanding Secure
Path operations. Please re-
issue ioscan command to scan
Secure Path devices
Occurs when ioscan is executed
in parallel to the spmgr delete
command.
CPQswsp: Mapping error.
Cause: No free c#t#d#
available for mapping for
the unit
600508B4000149200001600000
5B0000. The unit will be
kept in the unattached list.
To map this unit, clean up
any stale undiscovered units
present using 'spmgr clean
[option]' and run ioscan
Occurs when there is are no free
c#t#d# values available for
mapping the LUN.
CPQswsp: Allocation error.
Cause: Failed to allocate
memory for the 'swsp' node
of the unit
600508B4000149200
0016000005B0000. The unit
will be kept in the unat-
tached list. To map this
unit, free up memory and run
ioscan
Occurs when there is a failure in
allocating memory required for
the swsp node creation.
HP StorageWorks Secure Path 3.0F Service Pack 4 for HP-UX 11i v1.0 and 11i v2.0 75