Installation and Reference Guide HP StorageWorks Secure Path 3.0F Service Pack 4 for HP-UX 11i v1.0 and 11i v2.0 (5697-8001, March 2009)

2. Perform a complete system backup and document your server file systems, mount points, and
device files.
3. Select one of the following SCSI options:
• If you want to continue to use SCSI-2 and ACS 8.6 or later, proceed to Upgrading from the
Web.
• If you are using SCSI-2 and want to use SCSI-3, you must first change the array in SCSI-3
mode. Complete the procedure in Using SCSI-3.
Keep the following in mind:
• Secure Path 3.0F SP4 requires ACS 8.7 or later for use with SCSI-3 mode. Upgrade the
HSG80 controllers to ACS 8.7 or later using the instructions in the Maintenance and
Service Guide for Solution Software 8.8 for HP-UX.
The rolling upgrade method that upgrades ACS 8.7-3 to ACS 8.8 (described in the
Maintenance and Service Guide for Solution Software 8.8 for HP-UX) fails if the server is
running application I/O to the array that is being upgraded. You must quiesce all I/O to
the array before starting the rolling upgrade procedure.
4. Change the HSG80 operating system mode from HP to HP_VSA using the array’s CLI interface
(ACS 8.7 or later) by entering the following command:
HSG80> show connections
A connection table similar to the following is displayed:
Connection Unit
Name Operating system Controller Port Address Status Offset
!NEWCON13 HP OTHER 1 offline 0
HOST_ID=5006-0B00-0009-CE61 ADAPTER_ID=5006-0B00-0009-CE60
!NEWCON14 HP OTHER 2 offline 0
HOST_ID=5006-0B00-0009-D8C7 ADAPTER_ID=5006-0B00-0009-D8C6
!NEWCON15 HP THIS 1offline 0
HOST_ID=5006-0B00-0009-CE61 ADAPTER_ID=5006-0B00-0009-CE60
!NEWCON16 HP THIS 2offline 0
HOST_ID=5006-0B00-0009-D8C7 ADAPTER_ID=5006-0B00-0009-D8C6
5. Using the connection name for the server that you are upgrading, change the operating system
mode by entering the following commands:
HSG80> set !NEWCON13 operating_system=hp_vsa
HSG80> set !NEWCON14 operating_system=hp_vsa
HSG80> set !NEWCON15 operating_system=hp_vsa
HSG80> set !NEWCON16 operating_system=hp_vsa
6. Verify the change by entering the following command:
HSG80> show connections
The output looks similar to the following:
Connection Unit
Name Operating system Controller Port Address Status Offset
!NEWCON13 HP_VSAOTHER 1 offline 0
HOST_ID=5006-0B00-0009-CE61 ADAPTER_ID=5006-0B00-0009-CE60
!NEWCON14 HP_VSAOTHER 2 offline 0
HOST_ID=5006-0B00-0009-D8C7 ADAPTER_ID=5006-0B00-0009-D8C6
HP StorageWorks Secure Path 3.0F Service Pack 4 for HP-UX 11i v1.0 and 11i v2.0 71