Installation and Reference Guide HP StorageWorks Secure Path 3.0F Service Pack 4 for HP-UX 11i v1.0 and 11i v2.0 (5697-8001, March 2009)

Syntax:
# spmgr clean [option]
Options:
-d <WWLUNID>-Cleans LUN configuration data from the stale device list.
-r <WWNN>-Cleans all the array configuration data from the stale device list.
all -- Full system-wide clean.
NOTE:
WWNN is the World Wide Node Name of the array, and WWLUNID is the World Wide LUN ID of the
device.
# spmgr clean -d WWLUNID
This command verifies and cleans the indicated unit from Secure Path for Active-Passive configuration.
Syntax:
# spmgr clean -d WWLUNID
Example:
# spmgr clean -d 6000-1FE1-0000-9320-5000-1FE1-9321-5733
# spmgr clean -r WWNN
This command identifies all undiscovered units for the specified array and cleans the persistent data
of those units from the Secure Path for Active-Passive configuration.
Syntax:
# spmgr clean -r WWNN
Example:
# spmgr clean -r 5000-1FE1-0003-4420
# spmgr clean all
This command identifies all undiscovered units on the system and cleans the persistent data of those
units from the Secure Path for Active-Passive configuration.
Syntax:
# spmgr clean all
client command
The client command allows you to connect or disconnect from the server.
Syntax:
# spmgr client [option]
Oprtions:
add <client name>—Allows the remote client to communicate with the server.
delete <client name>—Disables the remote client that is communicating with the server.
HP StorageWorks Secure Path 3.0F Service Pack 4 for HP-UX 11i v1.0 and 11i v2.0 67