Installation and Reference Guide HP StorageWorks Secure Path 3.0F Service Pack 4 for HP-UX 11i v1.0 and 11i v2.0 (5697-8001, March 2009)

# spmgr notify
Severity levels
Messages from the Secure Path for Active-Passive devices are one of the following three severity levels:
Critical messages are severity level 1.
Warning messages are severity level 2.
Informational messages are severity level 3.
The notify command sends event notices from the highest to the lowest level of the severity, marking
as follows:
A user with severity level 3 receives level 3, 2, and 1 severity messages.
A user with severity level 2 receives level 2 and 1 severity messages.
A user with severity level 1 receives severity level 1 messages only.
# spmgr notify add
This command adds an e-mail address to the notification list.
Syntax:
# spmgr notify add severity_level e-mail_address
Example:
# spmgr notify add 3 john.doe@oscar.edu.it
In the example, the Severity_level is 3 and the email_address is john.doe@oscar.edu.it.
NOTE:
A user is defined by a unique email_address. A user with more than one email_address may have
multiple records, one for each unique address.
# spmgr notify delete
This command deletes an e-mail address from the notification list.
Syntax:
# spmgr notify delete e-mail_address
Example:
# spmgr notify delete julie.smith@hollywood.edu
In this example, the email_address julie.smith@hollywood.edu is deleted from the notification list.
# spmgr notify
This command displays the list of users to be notified.
Example:
# spmgr notify
Server: hp.mydomain.com Report Created: Wed, Aug 15 15:42:37
2004
Secure Path for Active-Passive disk arrays54