Installation and Reference Guide HP StorageWorks Secure Path 3.0F Service Pack 4 for HP-UX 11i v1.0 and 11i v2.0 (5697-8001, March 2009)

System requirements ........................................................................................................... 83
Installing Secure Path ..........................................................................................................83
Installing Secure Path on a SAN boot device .......................................................................... 84
Upgrading from the Web ..........................................................................................................84
Removing Secure Path .............................................................................................................. 85
Command line interface ............................................................................................................ 85
autopath delete command ................................................................................................... 86
autopath add command ...................................................................................................... 87
autopath set command ........................................................................................................ 88
autopath display command ................................................................................................. 89
List of all arrays connected to a host ............................................................................... 89
Details of all LUNs connected from an array .................................................................... 90
Display autopath discover status .................................................................................... 90
List of array controllers connected to the host ................................................................... 91
List all LUNs in the unattached list .................................................................................. 91
Display LUN info using a device path ............................................................................. 92
Display LUN info using a LUN WWID ............................................................................ 93
Display all LUNs connected to the host ........................................................................... 93
autopath virtualdsf command ............................................................................................... 95
autopath virtualdsf clean command ................................................................................ 95
autopath monitor command ................................................................................................. 95
autopath help command ..................................................................................................... 96
autopath discover command ................................................................................................ 97
autopath retrieve command ................................................................................................. 98
autopath set_lbpolicy command ........................................................................................... 98
autopath set_prefpath command .......................................................................................... 98
Troubleshooting Secure Path for Active-Active disk arrays ................................................................ 99
Recovering after a failure .................................................................................................... 99
Secure Path messages ......................................................................................................... 99
Glossary .......................................................................................... 103
Index ............................................................................................... 105
HP StorageWorks Secure Path 3.0F Service Pack 4 for HP-UX 11i v1.0 and 11i v2.0 5