Installation and Reference Guide HP StorageWorks Secure Path 3.0F Service Pack 4 for HP-UX 11i v1.0 and 11i v2.0 (5697-8001, March 2009)

Storage: (fire) 5000-1FE1-0000-1290
LUN ID: 6000-1FE1-0000-1290-5000-1FE1-0000-4321
6000-1FE1-0000-1290-5000-1FE1-0000-4334
Storage: (jazzy) 5000-1FE1-0003-4420
LUN ID: 6000-1FE1-0000-9320-5000-1FE1-9321-5733
# spmgr refreshdisplay
This command updates the serial number of all available array controllers.
Syntax:
# spmgr refreshdisplay
alias and unalias commands
Secure Path for Active-Passive supports the use of aliases. Aliases replace longer strings with shorter
strings.
Example:
The WWNN of a storage system is 5000-1FE1-0005-3480. You can assign the alias Bird to
replace the longer, less easy-to-remember WWNN, 5000-1FE1-0005-3480.
When an alias is displayed by a spmgr command, the alias name is shown in parentheses before
the term it substitutes.
Example:
Storage: (fire) 5000-1FE1-0001-3420
The alias is fire.
The alias command lets you do the following:
• Define an alias and store it for future use.
• Remove an alias from the alias table.
• Display the alias table.
This section describes the following:
• # spmgr alias alias_name old_name
• # spmgr unalias
• # spmgr alias
# spmgr alias alias_name old_name
To add an alias to the alias table, use the following command:
Syntax:
# spmgr alias alias_name old_name
The following example creates the alias Birdtop for the controller serial number ZG66654211.
# spmgr alias Birdtop ZG66654211
# spmgr unalias
To remove an alias from the alias table, use the spmgr unalias command and specify the alias
name or the old name.
Syntax:
HP StorageWorks Secure Path 3.0F Service Pack 4 for HP-UX 11i v1.0 and 11i v2.0 49