Installation and Reference Guide HP StorageWorks Secure Path 3.0F Service Pack 4 for HP-UX 11i v1.0 and 11i v2.0 (5697-8001, March 2009)

2 c16t0d1 ZG10505167 td0 0/0/255.0.0.1 c4t0d1
WWNN: 5000-1FE1-0010-5B00 Path State: Standby
3 c16t0d1 ZG10505167 td1 0/0/255.0.0.1 c10t0d1
WWNN: 5000-1FE1-0010-5B00 Path State: Standby
4 c16t0d2 ZG10505167 td0 0/0/255.0.0.2 c4t0d2
WWNN: 5000-1FE1-0010-5B00 Path State: Standby
5 c16t0d2 ZG10505167 td1 0/0/255.0.0.2 c10t0d2
WWNN: 5000-1FE1-0010-5B00 Path State: Standby
# spmgr display –d[v] device_instance
The -d switch displays device-related information. If a parameter is supplied, it must be a device
instance.
Syntax:
# spmgr display –d
-dv
-d device_instance
-dv device_instance
Example:
# spmgr display –d
Server:hp.mydomain.com Report Created: Thu, Sep 13 16:44:25 2004
Command: spmgr display -d
Devices by Storage System
== = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
Devices: c16t0d0 c16t0d1
Example:
# spmgr display –dv
Server:hp.mydomain.com Report Created: Thu, Sep 13 16:50:04 2004
Command: spmgr display -dv
Device: c16t0d0 Status: Operational [4 paths (2/0/2)]
Storage: 5000-1FE1-0010-5B00
LUN ID: 6000-1FE1-0010-5B00-0009-1050-6981-0013
Preferred Controller: None
HBAs: td0 td1
Device: c16t0d1 Status: Operational [4 paths (2/0/2)]
Storage: 5000-1FE1-0010-5B00
LUN ID: 6000-1FE1-0010-5B00-0009-1050-6981-0014
Preferred Controller: None
HBAs: td0 td1
etc.
NOTE:
Secure Path for Active-Passive disk arrays displays path states using the following convention:
[total number of paths (active/failed/offline)]
“Offline” refers to the total count of standby paths and failed paths.
Actual numerical equivalents replace the text.
For example, the following attributes are displayed as [10 paths (8/0/2)]:
Total paths = 10, Active = 8, Failed = 0, Offline = 2
Example:
HP StorageWorks Secure Path 3.0F Service Pack 4 for HP-UX 11i v1.0 and 11i v2.0 45