Installation and Reference Guide HP StorageWorks Secure Path 3.0F Service Pack 4 for HP-UX 11i v1.0 and 11i v2.0 (5697-8001, March 2009)

ManualsBrandsHP ManualsSoftwareHP Secure Path for HP-UX

# fcmsutil /dev/td1 get remote all (to obtain all Target N_Port_ids in the

form 0x011200 for attached arrays)

# fcmsutil /dev/td1 replace_dsk Target N_Port_id#1

# fcmsutil /dev/td1 replace_dsk Target N_Port_id#2

…

# fcmsutil /dev/td1 replace_dsk Target N_Port_id#n

# fcmsutil /dev/tdn get remote all (to obtain all Target N_Port_ids in the

form 0x011200 for attached arrays)

…

# ioscan -fn

For example, if your server has HBAs td0 and td1, then you need to issue the following command

for both HBAs:

# fcmsutil /dev/td2 get remote all

Target N_Port_id is = 0x010000

Target state = DVS_READY

Symbolic Name = HSV210 - E8K_A5R1_0CE0_WIN_AA - CR0B42

Port Type = N_PORT

SLER Capable (supports Retry) = NO

Target Port World Wide Name = 0x50001fe100270ce8

Target Node World Wide Name = 0x50001fe100270ce0

Common Service parameters (all values shown in hex):

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Version_Hi: 9 Version_Low: 9

BB_Credit: 0 Ciro: 1

Alt_BBcred: 1 Rxsz: 800

Conseq: ff RO_Bitmap: 1

Resolution: 0 EDTOV(ms): 0

Vendor version (in hex) 0 0 0 0

-------------------------------------------------------------

Target N_Port_id is = 0x010100