Installation and Reference Guide HP StorageWorks Secure Path 3.0F Service Pack 4 for HP-UX 11i v1.0 and 11i v2.0 (5697-8001, March 2009)

display command, 41
# spmgr, 42
log settings, 53
displaying
alias, an, 50
configuration information, 38
path states, 45
documentation
providing feedback, 11
documentation, array configuration, 22
drivers
HPswsp, 85
hsx, 15
sdisk, 24
swsp, 15
dual RAID controllers, 15
E
enable notification, logging, 53
enterprise virtual array
array, configuring, 27
HSV element manager, 27
upgrading Secure Path, 70
EVA3000, overview, 13
EVA5000, overview, 13
F
failback options, 18
failed state, 39
failover, 17, 82
fcmsutil utility, 20
H
hardware setup, HSx, 19
HBA
restart -a, x11 # spmgr, 62
restart -a,x11 # spmgr, 62
help
obtaining, 10
HP
technical support, 10
HP SD utility, 85
HPswsp driver, 85
HSx
installing software, 32
removing software, 69
SAN boot device, 34
upgrading software, 70
hsx driver, 77
I
installation
silent, 17
installing
HSx software, 32
new HSx configuration, 20
on an HSx SAN boot device, 34
on an xp boot device, 84
remote management, 68
xp software, 83
installing
Multipathing software, 15
ioscan
commands, 30
running, 63
L
load balancing, 18, 50, 81
active paths, 58
load distribution
described, 18
disabled, 17
enabled, 17
log command, 52
console, 53
enable, 53
settings display, 53
LUNS
adding and deleting, 62
restoring, 60
M
management tools, 16
multiple-bus mode, 14
N
notification, 53, 53
notification severity levels, 54
notify
add, 54
address, 54
command, 53
delete address, 54
display addresses, 54
O
offline state, 39
operational state, 38
optional array features, 23
106