Installation and Reference Guide HP StorageWorks Secure Path 3.0F Service Pack 4 for HP-UX 11i v1.0 and 11i v2.0 (5697-8001, March 2009)

Index
Symbols
# spmgr
add WWLUNID, 64, 64
client add, 68
client delete, 68
display (default), 42
display -s, 48
display -u, 48
log -c, 53
log -l, 53
log -n, 53, 53
notify, 54
notify add, 54
notify delete, 54
password, 69
quiesce - a controller, 61
quiesce - a HBA, 60
quiesce - c controller, 61
quiesce - c path_instance, 61
quiesce - p path_instance, 61
refreshdisplay, 49
restart -p path_instance, 62
restart -a HBA, 62
restart -c controller, 62
restart -p path_instance, 62
restore all, 60
restore all paths to device, 60
restore all paths to storage system, 60
select -c controller_serial_number, 55
select -p path_instance, 56
set -f, 52
set -p, 52
verifying a path, 18
A
active paths and load balancing, 58
active state, 39
adding
LUNs, 62
Secure Path to an existing configuration, 21
SP to an existing RA/MA8000 or
ESA/EMA12000 Configuration, 21
WWLUNID, 64, 64
addresses
delete, 54
display, 54
notify, 54, 54, 54
alias
defining, 49
displaying, 50
array configuration documenation, 22
available state, 39
C
commands
autopath discover, 97
autopath display, 89
autopath help, 96
autopath retrieve, 98
autopath set_lbpolicy, 98
autopath set_prefpath, 98
display, 41, 42
log, 52
notify, 53
set, 50
spmgr, 36
configuration information, displaying, 38
configuration tool, 16
console, logging, 53
controllers
preferring a unit, 25
quiesce, 61
restart -cx11 x11 spmgr, 62
states
critical, 39
operational, 38
critical state, 38
D
defining
alias, 49
unalias, 49
deleting LUNs, adding and, 62
device states, 39
display -s, # spmgr, 48
display -u, # spmgr, 48
HP StorageWorks Secure Path 3.0F Service Pack 4 for HP-UX 11i v1.0 and 11i v2.0 105