Installation and Reference Guide HP StorageWorks Secure Path 3.0F Service Pack 4 for HP-UX 11i v1.0 and 11i v2.0 (5697-8001, March 2009)

Syslog messageEvent
AUTOPATH: un-install in progress. Aborting the com-
mand execution
UNINSTALL IN PROGRESS
AUTOPATH: cannot un - install hpap module, one of
the paths on which I/O / Open was issued originally
is failed
UNINSTALL ABORT
AUTOPATH: Cannot un - install hpap module, The fol-
lowing Device(s) have I/O's Queued
UNINSTALL ABORT
AUTOPATH : Warning: Unable to access device
DEVICE ACCESS FAILED MESSAGE
AUTOPATH: Warning: LUN count reached maximum value
of %d. Last device recognized is
MAXIMUM LUN COUNT REACHED
MESSAGE
AUTOPATH: Warning: Cannot add path 0x1f040000 as an
alternate link. Path count to end device reached
maximum value of 0x1f040000
MAXIMUM PATH COUNT REACHED
MESSAGE
AUTOPATH: Warning: Cannot register path 0x1f040000
as an Auto Path device. Path is already registered
ULM REGISTER FAILED MESSAGE
AUTOPATH: Path 0x1f040000 failed! Rerouting to altern-
ate path
PATH FAILED MESSAGE
AUTOPATH : All the paths to the end device 0x1f040000
failed
ALL PATHS FAILED MESSAGE
AUTOPATH : Path 0x1f040000 recovered
PATH RECOVERED MESSAGE
AUTOPATH : Device Busy : 0x1f040000
DD DEVICE BUSY
AUTOPATH : LUN collision occurred at 0x1f040000
LUN COLLISION
AUTO PATH: Warning: Could not Install HPAP Driver
ret = 0x1f040000
DRIVER REGISTRATION FAILURE
AUTOPATH: data structure initialization failed
DATA STRUCTURE INITIALIZATION
FAILURE
AUTOPATH: Failure in Uninstalling HPAP driver
DRIVER DE-REGISTRATION FAILURE
HP StorageWorks Secure Path 3.0F Service Pack 4 for HP-UX 11i v1.0 and 11i v2.0 101