Installation and Reference Guide HP StorageWorks Secure Path 3.0F Service Pack 4 for HP-UX 11i v1.0 and 11i v2.0 (5697-8001, March 2009)

Syslog messageEvent
AUTOPATH : no Secure Path device found
NO AUTOPATH DEVICE
AUTOPATH : load balance policy set successfully for
0x1f040000
SET POLICY SUCCESS
AUTOPATH : path is not up, so the next active path
is set as Preferred Path
SET NEXT PATH AS PREF PATH
AUTOPATH : Preferred Path set successfully for
0x1f040000
SET PREFERRED PATH SUCCESS
AUTOPATH : no alternate links present
NO ALTERNATE LINKS PRESENT
AUTOPATH : monitor command failed
MONITOR IOCTL FAILED
AUTOPATH : invalid device entry
INVALID DEVICE ENTRY
AUTOPATH : invalid load balancing policy
INVALID LB POLICY
AUTOPATH : device open failed
DEVICE OPEN FAILED
AUTOPATH : device busy
DEVICE BUSY
AUTOPATH : not enough memory
MEMORY ALLOCATION FAILURE
AUTOPATH: autopath discover is in progress. please
try later
DISCOVER IN PROGRESS
AUTOPATH: autopath delete is in progress. please try
later
DELETE IN PROGRESS
AUTOPATH : LUNs in this array are not configured un-
der SecurePath control
ALL LUNS DELETED
AUTOPATH : HPswsp component missing or corrupted
AUTOPATH DRIVER NOT FOUND
AUTOPATH : file open failed
FILE OPEN FAILED
AUTOPATH : file read failed
FILE READ FAILED
AUTOPATH : file write failed
FILE WRITE FAILED
AUTOPATH : file seek pointer movement failed
FILE SEEK FAILED
AUTOPATH: persistence file not found or corrupted.
Command cannot proceed
FILE NOT FOUND
AUTOPATH: persistence file not found. Proceeding to
create one
FILE NOT FOUND CREATING NEW
AUTOPATH : persistence file updation done success-
fully
FILE UPDATE DONE
AUTOPATH: persistence file operations failed. Hence
persistence could not be retrieved
FILE OPERATIONS FAILED
Secure Path for Active-Active disk arrays100