- Hewlett-Packard All in One Printer User Manual
Table Of Contents
- Product basics
- Control panel
- Supported utilities for Windows
- Configure the product
- Load originals
- Scan and send documents
- Manage and maintain the product
- Solve problems
- Error codes
- Basic troubleshooting tips
- Restore factory settings
- Interpret control-panel status lights
- Control-panel message types
- Control-panel messages
- Installation problems
- Initialization or hardware problems
- Operation problems
- Product will not turn on
- Lamp stays on
- Scan does not start right away
- Only one side of a two-sided page scans
- Scanned pages are missing at the scan destination
- Scanned pages are out of order at the scan destination
- Optimize scanning and task speeds
- The scan is completely black or completely white
- Scanned images are not straight
- Scan files are too large
- Paper path problems
- Paper jamming, skewing, misfeeds, or multiple-page feeds
- Scanning fragile originals
- Paper does not feed correctly
- Originals are curling up in the output tray
- The bottom of the scanned image is cut off
- The scanned images have streaks or scratches
- An item loaded in the document feeder jams repeatedly
- Clear jams from the paper path
- Solve e-mail problems
- Solve network problems
- Contact HP Support
- Supplies and accessories
- Service and support
- Product specifications
- Regulatory information
- Index

Supported document sizes
The maximum capacity of the document feeder is 50 sheets of 75 g/m
2
(20 lb) paper. When using
heavier paper, the maximum capacity is decreased. The maximum capacity of the document feeder
with card stock is 10 cards.
Paper Type Width Length Weight (or Thickness)
Standard stock 52–216 mm (2.1–8.5 in) 74–864 mm (2.9–34 in)
50–120 g/m
2
(13.3–32 lb)
Card stock 52–210 mm (2.1–8.3 in) 74–269 mm (2.9–10 in)
253–312 g/m
2
(12–15 points)
Polyvinyl chloride or polyvinyl
chloride acetate (for ID
cards)
52 mm (2.1 in) 86 mm (3.4 in) 1.4 mm (0.056 in) or less
Supported document sizes 31