HP StorageWorks SB40c Storage Blade Maintenance and Service Guide (433903-002, April 2009)

Figure 1 Partnered with a half-height server blade
Figure 2 Partnered with a full-height server blade
5. Place the SB40c on a flat, level work surface.
WARNING!
To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system
components to cool before touching them.
CAUTION:
To prevent damage to electrical components, properly ground the SB40c before beginning any
installation procedure. Improper grounding can cause ESD.
Remove the access panel
To remove the component:
1. Power down the partner server blade.
2. Remove the SB40c.
Storage blade preparation20