Managing HP Serviceguard A.12.00.00 for Linux, June 2014

Figure 30 (page 130) shows that pkg1 and pkg2 running on Node 2 and pkg4, pkg5, and
pkg3 running on Node 4.
Figure 30 Load Distributed across the Nodes after Failover
pkg2 (wt=9)
pkg1 (wt=7)
Used Cap=16
Node 2
pkg4 (wt=4)
pkg5 (wt=4)
pkg3 (wt=10)
Used Cap=18
Node 4
Scenario 2: Starting packages with cmrunpkg –a command
1. Create a cluster and packages as described in step 4 of scenario 1.
2. Halt pkg3 and pkg5:
cmhaltpkg pkg3 pkg5
# cmviewcl
test1_cluster up
NODE STATUS STATE
test1 up running
test2 up running
PACKAGE STATUS STATE AUTO_RUN NODE
pkg2 up running enabled test2
NODE STATUS STATE
test3 up running
PACKAGE STATUS STATE AUTO_RUN NODE
pkg1 up running enabled test3
NODE STATUS STATE
test4 up running
PACKAGE STATUS STATE AUTO_RUN NODE
pkg4 up running enabled test4
UNOWNED_PACKAGES
PACKAGE STATUS STATE AUTO_RUN NODE
pkg3 down halted disabled unowned
pkg5 down halted disabled unowned
3. Run the following command:
cmrunpkg -a pkg3 pkg5
130 Planning and Documenting an HA Cluster