Serviceguard Manager Plug-in Compatibility and Feature Matrix- HPUX and Linux

- CONFIGURED_IO_TIMEOUT_EXTENSION

- must be set for extended-distance clusters using iFCP interconnects

between sites

• Supports Veritas CVM and CFS 5.0 only (3.5 and 4.1 versions not

supported). This applies to CVM standalone and CVM included in SMS

bundles

• July 2009 SG A.11.19 Patch provides:

- IPv6 only hosts and quorum server

- Online maintenance on a modular, failover package

- Rolling upgrade using DRD

- New -K param with cmgetconf (disables polling of VG's)

- Improved support for nested mounts

• October 2009 SG A.11.19 Patch provides:

- Rolling upgrade using DRD (enhanced)

- New Serviceguard Manager capabilities (graphical map,

toolkit integration, display site information)

- Support for CFS, VxVM and CVM version 5.0.1 on

HP-UX 11i v3

- Support for the target port congestion control capability in HP-UX

11i v3.

- Support for parallel resynchronization of LVM volume groups in HP-

UX 11i v3 .

- RAC 10gR2, 11gR1 with CVM/CFS 5.0

- RAC 10gR2, 11gR1, 11gR2 with SLVM, ASM over SLVM or raw

disks

-- Patches required with 11gR2 support

-- Integrity & HP 9000 Servers

-- Cluster size: 16 nodes maximum

-- Extended Cluster support (up to 100k between sites):

--- With SLVM and ASM over SLVM: 2, 4 nodes (4 nodes requires

SLVM v2)

--- With ASM over Raw disks: ASM mirroring with Extended

Cluster is allowed by

HP, supported by Oracle, contact Oracle for ASM mirroring

configuration requirements.

--- With CVM/CFS 5.0 & 5.0.1: 2,4,6,8,..16 nodes (up to 10km

between sites), 2,4 nodes (up to 100km between sites)

Note: CVM/CFS 5.0 is provided in SG SMS versions A.02.01 &

A.02.01.01 CVM/CFS 5.0.1 is provided in SG SMS version A.03.00

RAC 11gR2 with CVM/CFS 5.0 & 5.0.1 is not yet supported with HP

9000 Servers

- SGeRAC is supported in cross subnet environments only when

used with Metrocluster in a Site Aware Disaster Tolerant

Architecture

• Integrated with the Veritas version 5.0 products

• Supported on the HP-UX 11i v3 operating system

• Able to run on both HP 9000 and HP Integrity Servers