Building Disaster Recovery Serviceguard Solutions Using Metrocluster with 3PAR Remote Copy for Linux B.01.00.10, December 2013

Table 2 Validating Metrocluster package (continued)
ERROR: DC2_RC_VOLUME_GROUP
${RC3PAR_DC2_RC_VOLUME_GROUP} is not the
name of remote copy volume group
${RC3PAR_DC1_RC_VOLUME_GROUP} on the
storage system
${RC3PAR_DC2_STORAGE_SYSTEM_NAME}.
When the Remote Copy target name does not
match with the actual Remote Copy target of the
cmcheckconf [–v]
# cmcheckconf
Verify whether the Remote Copy target
names matches with the actual Remote
Copy target of the replication group as replication group as mentioned in the package
mentioned in the package configuration
file.
configuration file, the following error message is
displayed:
ERROR: The DC1 Remote Copy target name for
DC2 ${RC3PAR_DC1_RC_TARGET_FOR_DC2}
does not match the actual value.
When the Remote Copy volume group of DC2 is
a substring of the Remote Copy volume group of
cmcheckconf [–v]
# cmcheckconf
Verify whether the Remote Copy volume
group of DC2 is a substring of the
Remote copy volume group of DC1and
vice versa.
DC1 and vice versa, the following error message
is displayed:
ERROR: Both DC1_RC_VOLUME_GROUP and
DC2_RC_VOLUME_GROUP cannot have the same
value.
Cluster verification 27