HP StorageWorks Reference Information Storage System V1.5 Administrator Guide (T3559-96044, June 2006)

Figure 40 Journal Mining Event window
• Enabled check box: Use to enable or disable an event. The default value is Disabled.
• Number of Processes: Use to change the number of processes for each event from the default
value of 1.
• Frequency: Use the two Frequency check boxes to change the time interval between events from
the default value of 2 minutes to any multiple of minutes, hours, or days.
• SMTP Address: Select the SMTP Address check box and enter the RISS Virtual IP (VIP) used for
SMTP. The VIP is the internal RISS domain that stores documents and is the same value as the
ipToDomainInfo attribute used in Domain.jcml.
• Recipient Address: Select the Recipient Address check box and enter <user>@<riss-
domain.com>.Replace<riss-domain.com> with the RISS domain name that should store
the Exchange server email. The domain name must correspond exactly to the name specified in
Domain.jcml for this system. Note that more than one recipient can be specified, by separating
the addresses with commas.
• RISS Domain Name: Select the RISS Domain checkboxandenterthenameoftheinternalRISS
domain to which the email from this journal mailbox should be stored. The Domain Name must
match exactly thedomainnameattributespecifiedinDomain.jcml.
• RISS Domain ID: Select the RISS Domain ID check box and enter the domain ID that matches the
domain name specified above. The Domain ID must match exactly the domain ID attribute in
Domain.jcml.
• Server: Select the Server check box and enter the name of the Exchange ser ver for which journal
mining is being configured. This server name must be resolvable by DNS in the RISS.
• Mailbox: Select the Mailbox check box and enter the journal mailbox to be used.
• Journal Envelope Patch: Select the Journal Envelope Pa tc h check box if you want to change the
Journal Envelope Patch default value from No to Yes. This value indicates whether the Exchange
server specified above is using the Micr osoft Journal Envelope Patch.
• Use TNEF: Select the Use T NEF check box if you want to change the Use TNEF default value from
No to Yes. If Yes is selected, messages will be sent to the RISS in TNEF format.
• Delete Messages: Select the Delete Messages check box if you want to change the Delete
Messages default value from Yes to No. Thisvalueindicateswhethermessagesshouldbe
Reference Information Storage System Version 1.5
127