HP StorageWorks Reference Information Storage System V1.1 Administrator Guide (February 2005)

LO
Chapter 2: Platform Control Center Tour of PCC user interface
2-14 HP StorageWorks Reference Information Storage System Administrator Guide, February 2005
Host and service status values
Shading in Table 2-4 and Table 2-5 indicates normal values.
RESTORE Cell is a target for data restoration from another
smart cell.
Cell is not available for document storage, search, or
retrieval.
maintenance
DEAD C
ell requires attention .
Cell is not available for document storage, search, or
retrieval. If backup is enabled, some or all cell data
might
not be backed up; if so, data will never be
backed up.
failure
SUSPENDED Either of the following is true:
• Cell or its mirror cell has one or more
failed
processes
. In this case, both are SUSPENDED.
• Mirror cell is DEAD.
Note: If the cell’s Application Health service is OK, only
the mirror cell failed. (Use the Service Detail view to
check this service.)
Cell is not available for storage. Cell is available for
document search and retrieval (unless a failed
process disabled the search engine). If backup is
enabled, cell is backing up new data that has not yet
been backed up.
failure
Table 2-4: Host status values
Status Color Description
PENDING Gray Host has not yet been checked for status. When PCC
starts monitoring services associated with a host, the
host status value is set to PENDING.
UP Green Host is running, and responds to status checks.
DOWN Red Host is not running, and does not respond to status
checks.
Table 2-3: Smart cell life cycle states (continued)
Life cycle
state
Definition Importance