HP StorageWorks Reference Information Storage System V1.1 Administrator Guide (February 2005)

Archive Request file Chapter 4: PST Importer
HP StorageWorks Reference Information Storage System Administrator Guide, February 2005 4-17
<UseTNEF>
Specifies if submitted messages are stored in TNEF
format.
True indicates TNEF format is used.
False indicates TNEF format is not used.
<DistributeToAll>
Specifies if PST Importer sends a copy of the document
to all addresses specified in the message.
True enables this setting.
False indicates only the owner specified in
<Repository> receives the document. If set to False,
HP highly recommends using a repository that is not
associated with an active email account. This prevents
other mining processes, such as journal or mailbox
mining, from introducing duplicate email messages into
the specified repository.
<EnsureOwnerReceipt>
Specifies if specified repository receives a copy of the
message whether or not owner is specified in the To,
From, Cc, or Bcc headers. This setting is especially
useful for distribution lists.
True enables this setting.
False disables this setting.
<ForceProcessing>
Specifies if messages in a PST file that has been
previously processed are tombstoned. Under normal
circumstances, a PST file is not processed again unless
it changes. This option forces Archive Request Loader
and PST Importer to process the file again.
The
<ForceProcessing> tag is supported in the
<Header> only. It cannot be applied to an individual
<FileSpec> and is ignored if specified there.
<Tombstone>
Controls tombstoning:
0: Tombstoning is not enabled.
1: Only attachments are tombstoned.
2: Both attachments and the message body are
tombstoned.
<FileSpecCount> Optional. Number of <FileSpec> tags listed later in the
file. If provided, this tag controls file integrity by
comparing the specified number to the actual number of
<FileSpec> tags found.
Table 4-1: Tags in <Header> (continued)
Tag Description