HP StorageWorks Reference Information Storage System V1.1 Administrator Guide (February 2005)

Host Information view Chapter 2: Platform Control Center
HP StorageWorks Reference Information Storage System Administrator Guide, February 2005 2-131
Adding comments for specific hosts
If you work with other administrators, you might find it useful to share infor-
mation about a host that has problems. If you do not check the
Persistent
check box, comments are automatically deleted the next time Nagios is
restarted.
Schedule an immediate check of
all services on a specific host
Schedules immediate check of all services on
specified host. Checks are scheduled immediately,
not necessary executed immediately. If Nagios falls
behind in its scheduling queue, it checks services
queued prior to these services.
If you select the Force check box, Nagios forces a
check of all services on host regardless of when
scheduled checks occur and whether or not checks
are enabled for those services.
Enter information in the Host Name field.
Disable checks of all services on a
specific host
Disables all service checks associated with
specified host. When a service is disabled, Nagios
does not monitor the service and stops sending
notifications for specified service. To have Nagios
check service again, you must re-enable service.
Disabling service checks may not prevent
notifications from being sent about host those
services are associated with. This
does not disable
checks of host, unless you check the Disable for host
too check box.
Enter information in the Host Name field.
Enable checks of all services on a
specific host
Enables all service checks associated with specified
host. This does not enable checks of host, unless
you check the Enable for host too check box.
Enter information in the Host Name field.
Disable event handler for a
specific host
Temporarily prevents Nagios from running the host
event handler for specific host.
Enter information in the Host Name field.
Disable flap detection for a specific
host
Disables flap detection for specific host.
Enter information in the Host Name field.
Table 2-113: Host Commands section, Host Information view (continued)
Command Link Description