HP RIP Software Release Notes Release Notes
Update Instructions 1. Exit any software programs that are running on the server workstation. 2. Disable anti-virus software as recommended by the manufacturer, and re-enable it after the RIP installation process is complete. Some anti-virus software may prevent the RIP from being properly installed. You can update the RIP in either of two ways: • Internet update with downloaded setup.
Relicense After you restart the RIP following a software update, you may need to relicense the software. 8. If prompted by the RIP, locate and write down the Host ID, located in the Licensing pane of the RIP “home page.” The Host ID number is a series of numbers and letters, as shown in the Licensing pane of the RIP “home page.” 9. Locate and write down the serial number of your printer, which is located on the silver label on the printer. 10.Locate and write down the HP invoice number for your printer.
Version 1.4.250 • Color profile creation has been fully enabled. • The first time the software runs, you must accept a new, Hewlett-Packard standard “signature.” When you start the software, a message appears: “The application’s digital signature cannot be verified. Do you want to run the application?” Check the box marked “Always trust content from this publisher,” and click the Run button. Version 1.
• Various user interface and performance improvements have been made, including a new print preview window. • The Help option has been removed from the Kodiak system tray icon menu. • The color profile editing function has been removed from the RIP. It will be reintroduced in a future version. • In the Linearization tab of ColorMark+, curve editing has been removed. The Reset one and Reset all buttons have been removed from the user interface.
• Verification ramps — the rows in the ColorMark+ verification ramps are labeled with numbers instead of the colors used. The numbers correspond to the colors used in the ramps as follows: 1=C, 2=M, 3=Y, 4=K, 5=M+Y, 6=Y+C, 7=C+M, 8=CMY, 9=CMYK. Verification ramps Version 1.1 • Batch operations — you can now move, copy, pause/resume and delete a selection of multiple jobs, rather than just one job at a time. • Media Saver — performance of Media Saver jobs in queues has been improved.
Version 1.0 • Do not use the URL “localhost” when launching the RIP interface in a web browser, use the computer name or the computer’s IP address. See “Remote Console” on page 1-24 of the User Guide (part number 0706399) for instructions. • The “Start Kodiak Automatically” option in the Kodiak tray icon menu is disabled until a future version of the software. • Avoid large numbers of print jobs in queues, which slows the visible performance of the browser view of the RIP.
Technical Support For service and support, contact Technical Services: • World Wide Web: www.colorspan.com • Internet E-mail: cs.support@hp.com • Telephone: North America: (800) 925-0563 Outside North America: +1 952.944.4040 En Español: +1 952.943.
0706400 Revision E 9
© Copyright 2008 Hewlett-Packard Development Company, L.P. Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license. The information contained herein is subject to change without notice.
