DisplayMaker Legacy ColorMark+ - User Guide

1-2 Installing ColorMark+

Installing ColorMark+ The ColorMark+

Advanced Color Management System soft-

ware is an enhancement to the ColorSpan

Print Server Soft-

ware. To install the ColorMark+ software, you will need these

parts from the ColorMark+ product kit:

◆ ColorMark Key — this device enables the ColorMark+ soft-

ware. During the installation, you will enable the server’s par-

allel port so the ColorMark Key can be detected.

◆ ColorMark+ Software CD-ROM

◆ ColorMark CMS Software CD-ROM — contains factory-cre-

ated profiles for ColorSpan media and ink.

The ColorMark+ software runs on the following hardware

platforms:

◆ ColorMark Pro 1.5G, RIPStation 1G

◆ ColorMark Pro 1G/8000, RIPStation 700/800

◆ ColorMark Pro 4000, RIPStation 400

◆ ColorMark Pro 7000/5000, RIPStation 500

The ColorMark+ software works with the following external

devices for reading color characterization patches:

◆ GretagMacbeth Spectrolino spectrophotometer and

SpectroScan x/y table

◆ X-Rite DTP41 or DTP41T auto-scanning spectrophotometer

◆ The onboard photodiode on the ColorSpan DisplayMaker

Mach 12 printer, and the onboard CCD camera on the

ColorSpan DisplayMaker Esprit and Series XII printers

◆ ColorMark Calibrator

You can use the ColorMark+ software to create profiles for the

following printers:

◆ DisplayMaker Mach 12

◆ DisplayMaker Series XII

◆ DisplayMaker FabriJet XII

◆ DisplayMaker Esprit

You must use ColorMark+ version 1.5 to create profiles for other

ColorSpan printers, including the DisplayMaker HiRes 8-Color

Series and the Giclée PrintMakerFA.