ColorSpan Legacy System Control - User Guide

External Disk Drives 2-31
To Configure an External
Disk
To configure an external disk drive:
1. Click and hold either mouse button on the drive icon.
2. Select Configure from the icon menu.
The following dialog box is displayed:
3. Type a name for the drive.
The default is “SCSI ID x”, where x is the device's SCSI ID
number assigned when you connected the drive. You can
change the name to any other name if you wish, System
Control will append the name you give the drive to the
name RIP Saver.
4. Click OK.
Fig. 2-13. SCSI Configuration Dialog Box