ColorSpan Legacy System Control - User Guide

1-36 RIP Options
RIP Options
The RIP does not require any initial setup, but you can manage
jobs in the RIP using the RIP menu.
To Pause the RIP
To stop the RIP from accepting a new job,
1. Position the cursor over the RIP icon.
2. Click and hold either mouse button to view the RIP menu.
3. Select Pause.
Any job currently processing will finish, and then the RIP
icon will turn yellow
No jobs will be accepted while the RIP is paused.
4. Select Resume from the RIP menu to start accepting jobs.
To View a Processing File
To view information about a currently processing file, either
1. Click on the RIP icon
or
2. Select View Job… from the icon menu.
The Document Details dialog box appears.
(See “Setting Document Details” on page 2-24 for more
information about viewing a document’s settings in the doc-
ument details dialog box.)
To Delete a Processing File
To delete a file in the RIP:
1. View the job as described above.
2. In the Document Details dialog box, select Delete Job.
The job process status will quickly go to 100%, at which
time the job is fully deleted.
This method may not delete the job before it leaves the RIP.
You can restart the RIP to delete the file immediately (see
“To Configure the RIP” on page 1-37 for instructions on
restarting the RIP).