ColorSpan Legacy System Control - User Guide

Adding and Configuring Ports 1-35
To Remove Ports From
System Control
You can remove an existing port from the Ports group when it is
no longer needed.
1. From the System menu, select Remove - Port.
The following dialog box appears:
2. Click on the port name so that it is highlighted.
3. Click Remove.
The port is removed from the Ports group.
To Pause Ports
If you need to disable access to a port, you can Pause the port.
You can only pause between jobs. If you pause while spooling,
the port will not pause until it finishes spooling the job. The
WinLink port cannot be paused.
To pause a port:
1. Click and hold either mouse button on the desired port,
and then select Pause from the menu.
The port icon turns Yellow to let you know it is paused.
2. Select Resume from the menu to restart spooling.
Note
The WinLink port cannot be paused.
Fig. 1-18. Remove Port dialog box