ColorSpan Legacy System Control - User Guide

1-34 Adding and Configuring Ports
Novell Port Settings
(Novell Port Only)
Become familiar with your network and its configuration before
attempting to connect and configure the print server as a
PostScript device. Consult your system administrator for
assistance.
To set up the server as a NetWare print queue, follow these steps:
1. Use the NetWare utility software to create a new print
server and a print queue name for the ColorSpan print
server.
2. Configure the port on System Control. From the Configure
Port dialog box, click Settings…
The following dialog box appears:
3. Type in the File Server name, or click Browse to display the
valid NetWare file server names.
4. Type in the Print Server name assigned to the server or
click Browse to display valid Print Server Names.
To browse the Print Server names, you must supply a valid
NetWare login user name and password.
5. Type in the password for the selected Print Server (if any).
6. Type in the Print Queue name or click Browse to display
the valid NetWare print queues.
7. Enable NetWare 4.11 compatibility if printing over a Net-
Ware 4.11 network.
8. Click the Frame Type button to specify a Frame Type if nec-
essary.
9. Click OK.
Fig. 1-17. Novell NetWare Settings Dialog Box