ColorSpan Legacy System Control - User Guide

Adding and Configuring Ports 1-33
2. Set the TCP/IP address in one of two ways:
◆
Check the Automatic DHCP Configuration box. When
this is checked, the IP address and Subnet Mask are
grayed because they are determined by the system at
startup.
◆
Type in the addresses.
3. Click OK.
4. Restart the ColorSpan print server for these changes to
take effect.
Note
The ColorSpan print server communicates with Unix sys-
tems using a line printer daemon (LPD). Refer to Appen-
dix B for details.