ColorSpan Legacy System Control - User Guide

1-32 Adding and Configuring Ports
TCP/IP Port Settings
(TCP/IP Port Only)
For detailed information about connecting the print server to a
TCP/IP Ethernet network, refer to the Quick Start Guide that
accompanies your ColorSpan print server.
Set the IP Address, Subnet Mask and Default Gateway. If your
network has a DHCP server, you can enable DHCP configura-
tion, which automatically assigns all three of these values. You
can also override the DHCP-assigned Default Gateway by typing
it in, or assign the values by typing them in. Ask your system
administrator whether you should enable DHCP configuration.
Automatic DHCP Configuration is not available for the
Advanced Color Server.
Note
IP address values are not arbitrary numbers. Obtain these
addresses from your network administrator. All settings
must match the client workstations to enable them to
print to the TCP/IP port.
To access the TCP/IP address screen:
1. From the Configure Port dialog box, click Settings…
The following dialog box appears:
Fig. 1-16. TCP/IP Settings dialog box
If this box is checked, the
DHCP server will assign the IP
Address and Subnet Mask
values, and the address boxes
will be grayed out.