ColorSpan Legacy System Control - User Guide

Adding and Configuring Ports 1-29
Default AppleTalk Zone
(AppleTalk Port Only)
If you use EtherTalk, the server is located in the default Apple-
Talk zone of its connecting cable and appears there in the
Chooser. You can display the zone in the AppleTalk Zone dialog
box, as shown in Fig. 1-14.
Each port created in System Control is broadcast on your Apple-
Talk network and appears in the Chooser with its own name.
To view the default AppleTalk zone, follow these steps:
1. From the Configure Port dialog box, Click Zone…
The following dialog box appears:
2. Click OK.
Fig. 1-14. AppleTalk Zone dialog box